Hobart Error Codes
What Hobart fault codes and alarms mean, and what a technician checks for each one. Need it fixed? We repair Hobart equipment across the Charlotte area.
LXi / AM Select
| Code | Meaning | What to check |
|---|---|---|
| E0, E2, E3, E4 | Not filling or not filling high enough — unit won't run | |
| E5 | Not draining properly | |
| E6 | Needs service | |
| CL / Pr | Filling too high or leaking from door | Level unit, clean level probes, fill solenoid leak. |
| P1, P2, P3 (wrench) | Needs service |
LXe undercounter
| Code | Meaning | What to check |
|---|---|---|
| WASH ARM ALERT | Wash arm obstructed or clogged | |
| LOW RINSE TEMP | Low rinse temperature on consecutive cycles | |
| WASH / BOOSTER / RINSE TEMP SENSOR | Probe out of range | |
| FILL ERROR | Timed out before filling | |
| DRAIN ERROR | Drain problem — unit powers down | |
| SUMP / BOOSTER LEVEL SENSOR | Pressure switch out of range |
CL / CLe conveyor
| Code | Meaning | What to check |
|---|---|---|
| Clear Conveyor Jam | Rack jammed | Remove rack, press START. |
| Probe Err – TANK | Lower float issue in tank | |
| Probe Error – FnlRns | Final rinse probe issue | Open supply valve to rinse booster. |
Ecomax
| Code | Meaning | What to check |
|---|---|---|
| 01, 02 | Boiler temperature sensor | |
| 05, 06 | Tank temperature sensor high/low | |
| 07–10 | Pressure sensor high/low | |
| 13 | Tank filling pressure sensor monitor | Pump out. |
| 14 | Wash tank draining during pump-out | Clean drain hose. |
| 17, 18, 31 | Filling monitoring — check water supply |
Related service: Commercial Dishwasher Repair in Charlotte, NC