Call (980) 478-8030

Frequently Asked Questions

How much does a commercial service call cost?

We charge a flat diagnostic/service call fee that is applied to the repair if you approve the work. You get a written estimate before any repair starts — no surprises. Emergency, after-hours and weekend calls carry a premium.

Do you offer same-day or emergency service?

Yes. Restaurants, bars and hotels lose money every hour a cooler, freezer or ice machine is down, so we prioritize no-cooling and no-ice calls the same day whenever possible, including evenings and weekends.

What brands do you repair?

All major commercial brands, including Manitowoc, Hoshizaki, Scotsman, Ice-O-Matic, Follett, True, Turbo Air, Traulsen, Beverage-Air, Delfield, Continental, Atosa, Kolpak, Norlake, Heatcraft, Hobart, Frymaster, Pitco, Henny Penny, Rational, TurboChef, Speed Queen, Dexter, Continental Girbau, Electrolux Professional, Maytag Commercial, Milnor and ADC.

What areas do you serve?

Charlotte, NC and surrounding towns, plus nearby South Carolina.

My ice machine is running but not making ice. What should I check first?

Make sure the water supply is on and the filter isn't clogged, then check that the condenser (the radiator-like coil) isn't covered in dust or grease. If the display shows a code (for example E01 or 3 beeps), write it down — it tells the technician which part of the cycle failed.

How often should an ice machine be cleaned?

Most manufacturers call for a full clean, descale and sanitize at least every 6 months, and more often in hard-water areas, bakeries or busy bars. Air-cooled condensers should be cleaned monthly.

My walk-in cooler is warm but the compressor is running. Why?

The most common causes are an iced-over evaporator coil (defrost problem), a failed evaporator fan, a dirty condensing unit, a door that isn't sealing, or low refrigerant. Keep the door closed, move critical product, and call for service.

My reach-in or prep table is too warm — is it the thermostat?

Usually not. The most common cause is a dirty condenser coil, followed by torn door gaskets, a failed fan motor, or an iced coil. A technician can tell in a few minutes.

What does an error code like P1, E1 or HA mean?

Codes like P1/E1/E0 usually mean a temperature probe (sensor) failed or came loose; HA/HI means the box is too warm; LA/LO means too cold. Look up your exact code on our error code pages, or call us with the code and the model number.

Do you work on equipment under manufacturer warranty?

Warranty repairs usually must be done by the manufacturer's authorized service agent. If you're not sure whether you're covered, send us the model and serial number and we'll help you check.

Where do I find the model and serial number?

Ice machines: back panel or behind the front panel. Reach-ins: inside the cabinet on the upper side wall. Prep tables/undercounters: inside the cabinet or behind the front grille. Walk-ins: on the evaporator and the condensing unit. Washers/dryers: back panel or inside the door/lint area.

Do you carry parts?

We stock the most common parts (probes, fan motors, controls, valves, relays) and source OEM parts quickly for everything else.

Are your technicians EPA certified?

Refrigerant work requires EPA Section 608 certification, and our technicians are certified.

Do you offer maintenance plans?

Yes — scheduled preventive maintenance for ice machines, refrigeration, kitchen equipment and laundry. Planned maintenance prevents most emergency breakdowns, keeps you inspection-ready, and extends equipment life.

Do you service commercial laundry?

Yes — laundromat, hotel, gym, salon and apartment laundry: Speed Queen, Huebsch, UniMac, Dexter, Continental Girbau, Electrolux Professional, Maytag Commercial, Milnor and ADC washers and dryers.

My dryer runs but doesn't heat. Is it dangerous?

Lint buildup and blocked exhaust are the most common causes of no-heat and overheating faults — and they are a fire risk. Clean the lint screen, and have the lint chamber and exhaust duct inspected.

How long does a typical repair take?

Many repairs (probes, fans, controls, valves) are completed in one visit. Sealed-system work (compressor, leak repair) or special-order parts can take longer — we'll give you a timeline up front.

Do you provide documentation for health inspections or corporate?

Yes — every visit includes a written service report with the work done, temperatures and parts used.

How do I prepare for the technician's visit?

Have the model/serial number and any error code ready, clear access to the unit (and to the condensing unit on the roof for walk-ins), and tell us when the problem started.

Equipment down right now?

Same-day commercial service across the Charlotte area · Open 7 days · 7:00 AM – 10:00 PM

📞 Call now