Hoshizaki Error Codes
What Hoshizaki fault codes and alarms mean, and what a technician checks for each one. Need it fixed? We repair Hoshizaki equipment across the Charlotte area.
KM crescent cubers – beep alarms (reset button on control board)
| Code | Meaning | What to check |
|---|---|---|
| 1 beep | Evaporator overheated during harvest (high temp safety) | Hot gas valve not opening/energized, shorted thermistor, hot water entering machine. |
| 2 beeps | Two consecutive long harvests (20-min harvest backup) | Thermistor, hot gas valve, TXV/liquid line valve leaking by, weak compressor, water regulator (water-cooled). |
| 3 beeps | Two consecutive long freeze cycles | Float switch stuck closed, water valve leaking, hot gas valve leaking in freeze, pump motor stopped, TXV, weak compressor. |
| 4 / 5 beeps (older mech. bin control) | Bin control K-4 connector short (4) / open (5) — KM-280/500/630/900 | Per Parts Town; on newer boards 5 beeps can be freeze back-up timer (no water call in 30 min) — check board label. |
| 6 beeps | Low voltage | Check K2 connector ~10.5 V, control transformer 115 V in / 10.5 V out. |
| 7 beeps | High voltage | Same checks as low voltage. |
Related service: Commercial Ice Machine Repair in Charlotte, NC