Speed Queen / Huebsch / UniMac Error Codes
What Speed Queen / Huebsch / UniMac fault codes and alarms mean, and what a technician checks for each one. Need it fixed? We repair Speed Queen / Huebsch / UniMac equipment across the Charlotte area.
Commercial electronic controls – washer
| Code | Meaning | What to check |
|---|---|---|
| door | Door open | Close door; check door switch wiring. |
| E:0d | Pressure switch error | Check hoses/circuit. |
| E:Pr | Pressure switch sequence error | Replace pressure switch. |
| E:FL | Fill error (30 min) | |
| E:dr | Drain error | |
| E:dF | Drive failure | Motor and tach circuit. |
| E:dL | Door lock error | |
| E:dO | Door opened during cycle | |
| E:HT | Heater error | |
| E:SP | SPI communication error | Transformer unplugged / motor control wiring. |
| E:Ub | Unbalanced load |
Commercial electronic controls – dryer
| Code | Meaning | What to check |
|---|---|---|
| Alrm | Break-in alarm | Service door / coin vault switches. |
| E:OP / OP | Open temperature sensor | Replace thermistor. |
| E:SH / SH | Shorted temperature sensor | Replace thermistor. |
| E:07 / E:08 | Inoperative control | Replace control. |
| EI:07 / EI:08 | Error writing RTC / EEPROM | |
| Err | Coin error | Clear coin drop. |
| EC:xx | Smart-card / card reader errors |
Related service: Commercial Washer & Dryer Repair in Charlotte, NC